Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterValley Repair in Los Angeles, CA
Valley repair in Los Angeles addresses the flat or low-slope roof sections where two roof planes meet, usually over a garage, an addition, or a bedroom wing. These valleys take the hardest beating from rain, which in Los Angeles means the few heavy storms we get each winter, plus years of dust, debris, and sun-baked shingle wear. When a valley starts leaking, water follows the seam straight into your attic and walls, and that’s a repair you don’t want to sit on.
At Mercer Roofing Co Los Angeles, we repair roof valleys the way we repair every roof: with a written price before any work starts, a technician whose name and photo you get before we arrive, and a 365-Day Done Right Promise in writing on every job. If your valley leaks again within a year, we come back and make it right at no charge. Call (213) 521-8272 and a live person answers, day or night. This work falls under our broader Roof Repair service, and you can see how valley repair fits into full Roof Repair in Los Angeles on our dedicated page.
Key Takeaways
- Valley repair in Los Angeles typically runs $350 to $900 for most homes, depending on valley length, decking condition, and shingle type.
- Most valley repairs we schedule are completed in one visit, same day, because we stock common shingle colors and valley metal in our trucks.
- You get a written price before we start, a written 365-day guarantee on the repair, and a free second visit if it fails.
- The technician who shows up is background-checked, identity-verified, uniformed, and photo-badged. We send you their name and photo before they knock.
- Call (213) 521-8272 anytime. A real person answers. Estimates are free.
When You Need Valley Repair
Valleys don’t usually fail all at once. They wear down, and the signs start small. Here’s what we hear most from homeowners across Los Angeles, from Sherman Oaks to Highland Park to the hills above Studio City:
- Water stains on the ceiling near a wall or corner. If the stain lines up with the seam where two roof slopes meet, that’s usually a valley leak. In older Los Angeles homes with additions, the valley over the add-on is the first place water finds its way in.
- Granules collecting in your gutters or downspouts. Valley shingles wear faster than field shingles because water concentrates there. If you see a line of worn, bald shingles running down the valley, the protective surface is failing and the mat underneath is next.
- Lifted or curled shingles along the valley seam. Heat does this to asphalt shingles over time, especially on south-facing valleys in Los Angeles. Once a shingle lifts, wind drives water underneath it, and the leak starts.
- Rust or visible holes in valley metal. If your roof uses open metal valleys and you can see rust streaks or pinholes from the ground, the metal has given up. Water is hitting the underlayment below.
- Debris dams in the valley. Los Angeles gets pine needles, eucalyptus bark, and palm fronds that pile up in roof valleys. Trapped moisture rots the shingles and underlayment beneath, even during dry months.
- A musty smell in the attic after a good rain. That’s almost always trapped moisture, and on homes with valley seams, the valley is the usual point of entry.
If any of these match what you’re seeing, call (213) 521-8272. We’ll send a technician out, give you a written price for exactly what we find, and you decide from there. No pressure, no scare tactics.
Our Valley Repair Process
Here’s how valley repair works when you call Mercer Roofing Co Los Angeles. We built this process so you always know who’s coming and what you’re paying before anyone climbs a ladder.
- You call and speak to a person. No voicemail, no callback form. We answer 24/7. We’ll ask about what you’re seeing, where the home is, and what type of roof you have. Then we schedule a visit.
- You get your technician’s name and photo before the visit. Before we arrive, we send you the name and photo of the specific technician coming to your door. They arrive in a clean, marked uniform and present a photo ID badge. This is the Threshold Verified standard we’re held to on every visit.
- We inspect the valley and the surrounding roof. We don’t just look at the valley. We check the shingles above and below it, the underlayment beneath, the flashing where the valley meets walls or chimneys, and the decking underneath. What we find determines the written price we give you.
- You get a written price before any work starts. Once we know the scope, we put the price in writing. That includes labor, materials, and any decking or underlayment replacement. No surprises on the invoice, ever. If you say no, that’s the end of it, no charge.
- We perform the repair the same day. Most valley repairs are done in under four hours. We remove the damaged shingles or old valley metal, inspect the decking, replace the underlayment where needed, and install the new valley system using manufacturer-recognized materials. We work with brands like GAF and Tamko shingles, and use corrosion-resistant valley metal where the roof calls for it.
- You get the written guarantee. Every valley repair includes our 365-Day Done Right Promise in writing. If the repair fails within a year, we come back and fix it at no charge. That’s not conditional, not prorated. It’s included with every job.
Valley Repair Pricing in Los Angeles
Valley repair in Los Angeles typically costs $350 to $900 for most homes. Smaller, simpler valleys with good decking and standard architectural shingles land on the low end. Longer valleys, steep access, or valley sections with rotted decking push toward the higher end. Here’s a breakdown of what we see across the city, from Atwater Village to North Hollywood:
| Valley Repair Component | Typical Price Range |
|---|---|
| Replace shingles along a short valley (under 10 linear feet) | $350 to $500 |
| Replace shingles along a full valley (10 – 20 linear feet) | $450 to $700 |
| Replace valley metal with new galvanized or aluminum valley | $400 to $800 |
| Add or replace underlayment beneath the valley | $150 to $350 (add-on) |
| Replace rotted decking in the valley section | $200 to $450 (add-on, depends on area) |
What moves the price? Four things mostly. First, valley length. A valley over a two-car garage is shorter than one over a master suite addition, and you pay by the linear foot because materials and time scale with it. Second, decking condition. If water has been sitting on the plywood or OSB beneath the valley, it needs replacement, and that’s extra material and labor. Third, shingle type. Matching existing Atlas or Boral shingles is a little more expensive than standard three-tab, but it keeps the roof visually consistent. Fourth, access. Steep slopes, second-story valleys, or tight side yards add time, which adds cost.
Every estimate is free. We give you a written price before any work starts, and that price doesn’t change unless we find hidden damage and you approve the additional work in writing first. If you want to know exactly what your valley repair will cost, call (213) 521-8272 and we’ll schedule a free inspection.
Why Valley Repair Matters More Than You Think
A valley is the seam where two roof slopes meet, and every drop of rainwater that lands on either slope gets channeled down that seam. In Los Angeles, where a single winter storm can drop two inches of rain in a few hours, a compromised valley moves hundreds of gallons of water into places water should never go. The damage rarely stops at the ceiling stain. It spreads into insulation, drywall, framing, and electrical. If the leak has reached your vent boot, the repair scope widens quickly. By the time you see it on the ceiling below, the leak has usually been working for weeks.
There’s also a safety element. A valley that’s been leaking for months creates soft spots in the roof deck. Anyone walking on that roof, including a technician, risks stepping through. We take that seriously. Our technicians inspect the decking condition before they put weight on it, and we always flag soft spots in the written price so you know exactly what we found and why the repair costs what it does.
Valley Repair in Los Angeles Neighborhoods We Serve
We repair roof valleys across Los Angeles, and we know how the specifics of different neighborhoods affect the work. In Sherman Oaks, most homes have long, straight valleys over additions built in the 1960s and 70s, and the original valley metal is often rusted through at the seams. In Highland Park, we see craftsman homes with cedar shakes and older hot-mop sections where the valley meets flat roofing, and the transition points fail first. In Studio City and the hills, the valleys are steeper and harder to access, which means fall protection and careful staging matter. In Atwater Village and Silver Lake, many homes have low-slope roofs with asphalt rolled roofing in the valleys, and the seams crack under the sun. Wherever you are in the city, we’ll know what to look for when we get on your roof.
FAQs – Valley Repair
How much does valley repair cost in Los Angeles?
Valley repair in Los Angeles typically costs $350 to $900 for most homes, with the final price depending on valley length, decking condition, shingle type, and roof access. Short valleys with good decking land around $350 to $500, while longer valleys or those needing decking replacement run $600 to $900. Call (213) 521-8272 for an exact quote; the estimate is free and the price is in writing before we start.
Can you fix a roof valley the same day?
Yes, in most cases we fix roof valleys the same day we inspect them. Our technicians carry common shingle colors and valley metal in their trucks, and most valley repairs are completed in under four hours. If the decking beneath the valley needs replacement, we may need to schedule a follow-up, but that’s the exception, not the rule. Call (213) 521-8272 to schedule a same-day inspection, and a live person will help you right away.
Is it cheaper to repair a valley or replace the whole roof?
Repairing a valley costs $350 to $900, while a full roof replacement in Los Angeles typically runs $9,000 to $18,000, so valley repair is cheaper whenever the rest of the roof is in good shape. If the roof is older than 18 to 20 years or has multiple failing areas, a full replacement might make more sense. We’ll tell you honestly which is right for your roof, and the written price you get reflects that. Call (213) 521-8272 and we’ll help you figure it out without pushing a bigger job on you.
How long does a valley repair last?
A properly done valley repair using quality materials lasts 10 to 15 years or more, and we back every repair with our 365-Day Done Right Promise in writing. If the repair fails within a year, we come back and fix it at no charge. We use manufacturer-recognized shingles like GAF, Atlas, and Tamko, and corrosion-resistant valley metal, so the repair is built for Los Angeles weather. Call (213) 521-8272 if you want an inspection and a written price.
How to Get Started
If you think your roof valley is leaking or you want an inspection before the next storm, call (213) 521-8272. A live person answers 24/7. We’ll schedule a visit, send you the technician’s name and photo before they arrive, and give you a written price before any work starts. The estimate is free, and the repair is covered by our 365-Day Done Right Promise in writing. You can also learn more about our full Roof Repair in Los Angeles services or head back to our home page to explore everything we do.
Written by Grant Whitlock, Owner at Mercer Roofing Co Los Angeles, serving Los Angeles.