Boral Roof Repair Nationwide

Boral Roof Repair in Los Angeles: What to Know First

Boral roof repair in Los Angeles typically runs $450 – $1,900 depending on whether we’re replacing a few broken concrete tiles, rebuilding a valley, or re-flashing a penetration that’s been leaking into the decking. We’re an independent Boral service provider (not affiliated with or authorized by Boral), and most repairs are completed in a single visit once we’ve sourced the right tile profile. Call (213) 521-8272 for a written price before any work starts.

Call (213) 521-8272

This page is for Los Angeles homeowners who own a Boral roof and want straight answers: what fails, what it costs, and whether the repair will hold. If you’re looking at a cracked tile or a water stain on the ceiling and you’re not sure what it means, you’re in the right place.

Key takeaways:

• We repair every Boral concrete and clay tile profile still in service across Los Angeles, including Boral’s discontinued lines that many roofers won’t touch.
• Every Boral repair includes a written 365-day guarantee. If it fails within a year, the second visit is free.
• You get a written price before we touch your roof. No exceptions, no surprise invoice at the end.

How Boral Products Fail – and How We Fix Them

Boral tiles are tough, but they fail in predictable ways in the Los Angeles climate. Here’s what we actually see on roofs from the Valley to the Westside:

• Boral Barcelona / Villa profile cracking at the nose. These flat-profile concrete tiles are dense and heavy. When the underlayment below them degrades from decades of UV exposure and heat cycling, the tiles lose their seat and start micro-flexing at the leading edge. That hairline crack at the nose is the canary in the coal mine. We replace the tile and, when the underlayment is shot in that section, we strip a local section and re-lay it rather than just swapping tiles onto rotted felt. Just swapping the tile and walking away is how you get a call-back leak six months later.
• Boral clay tile (one-piece S and two-piece mission style) storm-collar failures around pipe penetrations. Los Angeles doesn’t get much rain, but when the Santa Anas kick up, they drive rain sideways into old, cracked storm collars. On clay roofs, the leak usually isn’t the tile – it’s the penetration flashing. We pull the old collar, inspect the vent boot underneath, and replace both when the neoprene boot has dry-rotted. It’s a small repair that saves a ceiling.
• Boral flat tile / Capistrano profile slippage from broken clips. Los Angeles sits in seismic territory. Boral flat tiles on steep pitches are held with clips that can fatigue or corrode, especially within a few miles of the coast where salt air works on metal. A slipped tile is more than cosmetic – it exposes the underlayment and creates a channel for the next rain. We re-seat the tile, replace the clip, and inspect the surrounding fifteen or twenty tiles for clip fatigue so you’re not calling us again after the next shaker.
• Valley failures on Boral two-piece clay roofs. Valleys collect debris in Los Angeles – jacaranda petals in the spring, pine needles in the foothills, eucalyptus bark year-round. When valleys clog on clay tile systems, water backs up under the tile and rots the valley metal. We pull the valley, replace the metal and the woven underlayment beneath, and on clay systems we often add a slightly taller valley guard to slow future debris buildup. It’s a common repair on Pasadena and Altadena hillside homes.
• Boral concrete tile color fade and surface spalling in inland heat zones. This isn’t always a leak, but it matters. Boral’s concrete tiles in the lighter colors – specifically the older Mission and Flat profiles – can spall in areas like the San Fernando Valley and San Gabriel foothills, where summer roof surface temperatures routinely hit 150 degrees. Spalled tile surface traps moisture and accelerates breakdown. We can’t restore the color, but we can tell you honestly whether individual spalled tiles need replacing now or whether the roof has five more years in it. Sometimes the right answer is to monitor.

Our Boral Roof Repair Process

Here’s what a Boral repair with Mercer Roofing Co Los Angeles looks like from the first call to the final walkthrough:

1. 1
   You call (213) 521-8272. A live person answers. You describe what you’re seeing. We ask the right questions and give you a rough sense of what it might cost before anyone drives out.
2. 2
   We schedule the visit – and you know who’s coming. Before our tech arrives, you get their name and photo. They pull up in a marked vehicle, in a clean uniform, and they hand you a photo ID badge. That’s the Threshold Standard, and it’s non-negotiable.
3. 3
   We do the diagnostic. On a Boral roof, that means checking more than the visible crack. We look at underlayment condition, flashing integrity, clip fatigue, and drainage around the affected area. We take photos and show you exactly what we found.
4. 4
   You get a written price. Before any work starts, you see line-item pricing. If we find something additional mid-repair, work pauses until we’ve walked you through it and you’ve approved it in writing.
5. 5
   We make the repair. For tile replacements, we match the profile and color as closely as the market allows. For flashing and structural repairs, we use materials that meet or exceed Boral’s installation standards. Every repair gets a secondary inspection before we leave.
6. 6
   You get the guarantee in writing. 365 days. If it fails, the second visit is free. We also walk the area with you so you see what we fixed and why.

What Boral Roof Repair Costs in Los Angeles

Here are the ballpark numbers for Boral repairs in Los Angeles, based on what we’re quoting across the city right now:

• Single tile replacement (concrete or clay profile): $450 – $700, depending on access, pitch, and tile availability.
• Penetration re-flashing (vent, pipe jack, or chimney step flashing): $350 – $650 for a single penetration; $900 – $1,400 if the decking below has rot and needs a local patch.
• Valley replacement on a Boral roof: $800 – $1,700 depending on length, pitch, and whether we’re replacing valley metal and underlayment or just the upper layer.
• Local underlayment repair with tile re-set (small section, 40 – 80 square feet): $1,200 – $1,900.
• Flat roof patch on a Boral flat tile system: $550 – $1,100 for a small to medium area.

What moves the price: pitch and access (a steep hillside in Silver Lake costs more than a walkable ranch in the Valley), tile discontinuation (we sometimes have to source reclaimed tiles to match a profile that Boral stopped making), and underlayment surprises once we lift the tile. You’ll know the exact number before we start. Call (213) 521-8272 for a free estimate.

Why Los Angeles Homeowners Call Mercer Roofing Co Los Angeles for Boral Work

Los Angeles is full of roofers who will replace a broken tile. Fewer will tell you why it broke, whether the underlayment is next, and whether the repair is even worth doing on a 27-year-old Boral concrete tile roof that’s nearing the end of its service life. We will. Grant Whitlock, our owner, grew up in Eagle Rock and has spent the better part of two decades working on LA roofs – flat torch-down in the Valley, clay tile on hillside bungalows in Silver Lake, Boral concrete everywhere in between. He’d rather talk you out of spending money you don’t need to spend than close a job that isn’t the right call.

We work on every shingle brand that matters in this market – GAF, Owens Corning, CertainTeed, IKO, Atlas, Tamko, and of course Boral – but we also solve the problem most roofers ignore: the stranger-at-the-door risk. Your technician’s name and photo arrive before they do. They badge in with photo ID. The price is in writing before a single nail is driven. Every repair carries a written 365-day guarantee, and a live person answers the phone around the clock. A roof should be the last thing on your mind – let’s keep it that way.

FAQs