Owens Corning
Architectural shingles
Metal roofing
Tile roofing
GAF
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Gutter Replacement: The Los Angeles Owner’s Guide
If you have an Owens Corning gutter system that’s failing, we stock and install compatible replacement components, and a typical section replacement in Los Angeles runs $12 – $22 per linear foot installed, depending on the profile and what’s happening behind the gutter. Most owners discover the problem the same way: a steady drip from the seam after rain, paint bubbling on the fascia board, or a gutter pulling away from the roofline with visible sag between hangers. We keep the common Owens Corning profiles on our trucks, so a straightforward run can usually be swapped the same day we come out.
Owens Corning built its name in roofing, but their gutter line shares the same design philosophy: solid, predictable, and sized to work with the roof system rather than against it. When one section fails, the fix is usually simpler than people expect, and it doesn’t have to mean replacing the entire run. Grant Whitlock has pulled enough corroded gutter sections off LA homes to know that most failures start small and get ignored until the fascia board starts rotting behind them.
Which Owens Corning Models This Applies To
Owens Corning gutters come in two main profiles we see across Los Angeles: the 5-inch K-style and the 6-inch half-round. The K-style is far more common on residential homes, and it’s what we stock most heavily. The half-round shows up on older Spanish and Craftsman homes in neighborhoods like Eagle Rock, Highland Park, and Silver Lake, where the look matters as much as the function.
Here’s the compatibility gotcha most owners don’t know: Owens Corning K-style gutters use a slightly different hanger spacing than some generic box-store brands. The factory spec calls for hangers every 24 inches, not the 32 to 36 inches you’ll see on cheaper aftermarket systems. If a previous contractor installed replacement sections with generic hangers at wider spacing, the gutter will sag prematurely, especially in the leaf-heavy months when wet debris adds real weight. When we replace a section, we match the original hanger points and re-set any that have pulled loose, so the whole run stays true.
For OEM versus aftermarket: Owens Corning sells replacement sections through their certified channels, and we can source them when you want a factory-exact match. In practice, a high-quality 0.027-gauge aluminum K-style section from a reputable manufacturer performs identically and costs 20 – 30% less. We’ll show you both options and the price difference in writing before any work starts.
Styles & brands we work with
Signs Your Owens Corning Gutter Replacement Is Failing
- Water dripping from the seam or end cap. The sealant Owens Corning uses at the factory breaks down after years of LA sun exposure, and once a seam opens, water finds the gap every time. A drip that only happens during heavy rain still means the seal is gone.
- Sagging sections between hangers. This usually means the hangers were spaced too far apart or the fascia board behind them is softening. Left alone, the sag gets worse and water pools instead of flowing to the downspout, which rusts the low spots first.
- Paint peeling or staining on the fascia board. Water is running behind the gutter, not inside it. This can be a failed drip edge, a gutter pitched the wrong direction, or separation at the back flange. The longer it runs, the more wood repair you’re buying.
- Rust streaks or pinhole corrosion on the gutter face. In coastal Los Angeles neighborhoods like Playa del Rey or San Pedro, salt air accelerates corrosion on any metal gutter, but pinholes usually mean standing water sat in the same spot for too long. One pinhole is a patch; several mean the section is done.
- Gutter pulling away from the roofline. The mounting screws have stripped out of the fascia, usually because the wood is water-damaged behind them. This is the point where delaying the replacement starts costing you fascia repair too.
Replacement Cost & What’s Included
In Los Angeles, expect to pay $12 – $22 per linear foot for installed Owens Corning-compatible gutter replacement, with most homes falling between $450 and $1,400 for a partial run. A full replacement on a typical 1,500-square-foot single-story home runs $2,000 – $3,600, depending on the number of corners, downspouts, and whether the fascia needs repair before new hangers go in.
Here’s what moves the price:
| Factor | Typical Impact |
|---|---|
| Gutter profile (5-inch K-style vs 6-inch half-round) | Half-round adds 20 – 30% for the material |
| Number of inside/outside corner miters | $15 – $30 each for factory-mitered corners |
| Fascia repair (if water damage is present) | $8 – $15 per linear foot to repair or replace |
| Downspout replacement or re-routing | $10 – $18 per linear foot, plus elbows and straps |
| Second-story work or steep roof access | Adds 15 – 25% for ladder and safety setup |
Every quote is a written price before we start, with parts and labor separated, and it includes our 365-Day Done Right Promise. If the gutter section fails within a year, we fix it and the follow-up visit is free.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things an owner can safely check before calling: whether the hangers have pulled loose, whether water is running behind the gutter instead of through it, and whether the visible seams have separated. Those observations help us quote the job accurately over the phone.
Swapping gutter sections isn’t high-voltage dangerous, but it is ladder work on a roofline, often at the second-story level, and the part you’re removing is full of wet leaves, roof grit, and sometimes nesting material. We’ve also found that the real repair is rarely just the gutter: the fascia behind it, the drip edge above it, and the downspout below it all matter. If the replacement section isn’t pitched correctly, or the seams aren’t sealed with the right outdoor-rated product, you’ll be back on the ladder next rainy season. For a straight answer about whether your gutter section can be repaired or needs replacement, call (213) 521-8272 and tell us what you’re seeing. We’ll give you a ballpark over the phone and a written price before any work begins.
FAQs
Aluminum Owens Corning-compatible gutters in LA typically last 20 – 30 years, though homes near the coast in neighborhoods like Playa del Rey or Long Beach often see faster corrosion from salt air, cutting the lifespan to 15 – 20 years. The seals at seams and end caps usually fail first, well before the metal itself gives out. If your gutters are over 20 years old and you’re patching multiple seams, replacement is usually the better use of money than repeated repairs. Call (213) 521-8272 for an honest assessment of what’s worth saving.
Yes, if the issue is a single separated seam, one loose hanger, or a small pinhole, a repair is often all that’s needed, and it costs far less than replacement. But if you have multiple seams failing, visible rust streaks, or the section has lost its pitch, patching becomes a game of whack-a-mole and replacement is the more honest recommendation. We’d rather tell you a repair will hold than sell a replacement you don’t need. Call (213) 521-8272 for a straight answer.
A typical single-story gutter section replacement in Los Angeles takes one to two hours from setup to cleanup, including removing the old section, checking the fascia board and hangers, installing the new section, and sealing all seams and end caps. If fascia repair or downspout work is needed, the job may extend to half a day. We always give you a written price and a realistic timeline before starting, and we don’t leave the old material in your yard.
We stock common 5-inch K-style aluminum sections, hangers, end caps, downspouts, and seam sealant on our trucks for Owens Corning-compatible installations. For 6-inch half-round profiles, we source the sections locally and typically have them within a day or two. If you’re looking at a specific profile, call (213) 521-8272 and we’ll confirm what we can bring on the first visit.
Get a Written Price Before Any Work Begins
If your Owens Corning gutters are dripping, sagging, or pulling away from the fascia, the fix starts with a phone call. Call (213) 521-8272 and you’ll talk to a live person, not voicemail. We’ll schedule a visit, and before any work starts, you’ll have a written price in hand and a name and photo of the technician coming to your door, badge in hand. A roof should be the last thing on your mind, let’s keep it that way.
Written by Grant Whitlock, Owner, Mercer Roofing Co at Mercer Roofing Co Los Angeles, serving Los Angeles and nearby areas.